Icon SP250 Bell Timer Setup Instructions
The Icon SP250 includes a built-in Time Table Program to control external bell signals for shift start, breaks, and lunch.
Enter Time Table Program Mode
| Step |
Action |
| 1 |
Open the punch clock cover |
| 2 |
Press SELECT until the diamond is under Time Table Program |
| 3 |
Press SET |
Select Active Days
| Option |
Schedule |
| 1–7 |
Single day (Mon–Sun) |
| 8 |
Monday–Friday |
| 9 |
Monday–Saturday |
| 10 |
Every Day |
Press SET again to move to the signal scheduling screen.
Activate Bell Output
| Step |
Action |
| 1 |
Use + or - to select Action |
| 2 |
Choose Option 3 (External Signal ON) |
| 3 |
Confirm programming |
After programming, connect the external power supply to the rear terminals labeled CLOCK to enable bell operation.
FAQ
Can different schedules be programmed?
Yes. Repeat the process for each required day or group.
What happens if Action 3 is not selected?
The external bell output will not activate.
Related Items
- Shift Bell Systems
- Electronic Punch Clocks
- Work Shift Timers