Pyramid 5300   24VDC Bell Module Signal Amplifier

 Made in USA

Connects by cable to Pyramid 4000 and 5000 self totaling clocks, Pyramid 7000 master clocks, and Pyramid Wireless Masters  If you have questions setting this up, or on how it works, call us.

How this works:

•  A flat BCD connector cable (included) connects this to the clock
• Using a "Y" cable, this acts as a signal booster for Master Clocks
•  110V plug goes to the wall
•  Connect the bell or horn (specifically only for the Pyramid 4000 and 5000 self totaling clocks) with two strand “lamp cord” - it's easy
•  You connect the bells or horns to this,
    -- or using our proprietary power supply to run your EXISTING 110V BELL, using our (custom, from us) 110V power booster. 
• This adds a signal feature to your programming menu in the clock.
  With the 5300, you can now ring up to 50 events
• It also boosts the power for up an additional 15 low voltage bells.
  Each event (each ring) can be applied to 1,2,3,4,5,6 even all 7 days of the week.  Example:  7AM on Monday is one event.  7AM ringing Monday through Friday is still just one event.  Typically one shift is 7 to 12 events.
   
• 7AM   9AM   908   910   11AM (lunch)   11:28
• 11:30   1:30   1:38   1:40   3:25  (five minute warning)  3:30PM (end of day)
• CAPACITY:   35 bells within 200'.  Add power booster over 8 bells or 200'
• Add an additional 5300 to boost the signal for the clocks as needed - usually after 200' or 8 clocks.  Each installation is unique.

Pyramid 5300 workshift timer add-on

Two applications: 

#1:  Pyramid 7000: Use as a signal booster for the Analog clocks, going beyond 8 to +4 more.  Add another 5300 power booster, add +4 more as needed. Each installation is different, and may require less boosters, or more.

#2  Pyramid 4000 and 5000HD self totaling clocks and TimeTrax Elite systems: 
This adds the ability to ring bells. It connects by an included BCD cable and requires 110V (an adapter is also included).  Sending out enough power to ring 4 to 8 bells.

It will also send a time signal to Pyramid digital and analog child clocks, so you can run bells and synchronized clocks from your TimeTrax Elite clocks - not the Pyramid 4000 and 5000HD clocks (not at this time).

This software is included with Pyramid TimeTraxElite computerized clock systems only. Pyramid paper time card clocks do not have this software, but they can be programmed to ring exactly the same way.  Including day of week, duration of time.